How to Load My Own Audio Files

Home › Forums › Environmental Sound Module Pro – Multi Scale › How to Load My Own Audio Files

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1009 Reply
    Lauren Cavanaugh
    Keymaster
    #2716 Reply
    jacksondev
    Keymaster

    To upload your files, connect a mini USB cable between your computer and the ESMPro Serial Port. This will create a USB disc drive on your computer. Use your file manager to upload your files to the
    ESMPro.

    NOTE: File naming is very important. Improperly named files will not play.

    Files must be named in the following format: 000X.mp3 Where “X” is the file identifier. This identifier is the same as the positions on the Sound Selector switch. Therefore, the sound identifier must be 09 or AF. For example, file 000E.mp3 will play when a trigger signal is received

    ESMPro Manual

    • This reply was modified 9 months, 4 weeks ago by jacksondev.
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: How to Load My Own Audio Files
Your information:




Scroll to Top